Non-Fire-Rated

CL0806 8' x 6' Non-Fire-Rated Chemical Storage Locker

The CL0806 is a 8' x 6' non-fire-rated chemical storage locker that stores up to 6 drums with 133 gallons of secondary spill containment. Renters use it for corrosives and oxidizers (segregated); pesticides, herbicides and fertilizers; and water treatment chemicals. Designed to help meet NFPA, EPA, OSHA and IFC requirements.

Capacity
Up to 6 drums
Spill sump
133 gal
Size
8' x 6'
Fire rating
Non-Fire-Rated

Full features, construction & components

CL0806 specifications

ModelCL0806
Fire ratingNon-Fire-Rated
Nominal size8' x 6'
Exterior (L x W x H)7'0" x 5'0" x 8'5"
Interior (L x W x H)6'5" x 4'4" x 7'1½"
Drum capacity6 drums
Storage floor area28.2 sq ft
Spill sump capacity133 gallons
Snow load40 PSF
Wind load130 MPH, Exposure C
Floor load500 PSF
Full storage load20,050 lbs
Building weight4,584 lbs

Standard

  • Ventilation
  • Secondary spill containment

Available options

Sized for

Common uses

  • Corrosives and oxidizers (segregated)
  • Pesticides, herbicides and fertilizers
  • Water treatment chemicals

Designed to help meet NFPA, EPA, OSHA and IFC requirements.

CL0806 features & components

This Non Fire-Rated Chemical Storage Locker, HAZMATCL0806, is a storage unit that measures 7′ long x 5′ wide x 8’5″ high. This locker is equipped to handle a capacity of 6 drums with a total of 28.2 Sq Ft of usable space for hazardous chemical or material storage. The building weighs about 4,584 pounds while empty.  In addition, it is rated for a 40 PSF of snow and can handle winds of up to 130 MPH .  This unit contains explosion-proof lighting and is climate controlled to allow for proper storage of hazardous materials.  All of our chemical storage units follow all of the Federal, State, and Local standards for personal safety and it also complies with standards set by the Occupational Safety and Health Standards (OSHA), Environmental Protection Agency (EPA), and the National Fire Protection Association (NFPA).

Non fire-rated construction is designed for standard, non-flammable hazardous chemical storage. These units are designed to safely store Herbicides, Fungicide, Pesticide, Fertilizer, Paints, and other FM & EPA regulated Chemical Storage where applicable. Please consult OSHA, NFPA, FM, and EPA to ensure all local regulation and chemical storage compliance requirements at your facility are met. Contact us today to discuss your needs.

  

CL0806 overview

Non Fire-Rated Chemical Storage Locker

  1. HAZMATCL0806 – FL 8′ x 6′ x 9′ Actual Dimensions
    Exterior: 7′ x 5′ x 8’5”       Interior: 6’5” x 4’4” x 7’1-1/2”
  2. Structural Load Certification
    Snow Load: 40 PSF                  Wind Load: 130 MPH Exposure C
    Floor Load: 500 PSF                 Building Weight: 4,584 LBS
    Full Storage
    : 20,050 LBS         Seismic Category: C
  3. Storage Capacity
    Storage: 6 Drums / 28.2 Total Sq Ft Sump Capacity:133 Gallons
  4. Each CL0806 hazardous material and liquid storage unit measures 7 feet wide, 5 feet long, and approximately 8’5” feet high.  This unit can store up to 6 drums at 28.2 total square feet, with a 133 gallon sump capacity.  These criteria meet the OSHA, EPA, and NFPA chemical storage regulations.  The CL0806 storage locker is also weatherproof and climate controlled.    All of our chemical storage buildings are made in the United States, using only the highest quality American steel.  In addition, we have perfected our manufacturing process to avoid rough edges, as well as sharp bends or kinks in the steel.  Our company is committed to excellence and providing top quality work that is free of manufacturing errors.  We ensure uniformity in each storage unit, and that your locker will be structurally strong and sound.  Our welding process was designed through the American Welding Society and meets the American Society for Testing Material’s (ATSM International) standards. For premium safety, all of our welds are in accordance with UL listed wall design.

Access Doors

Access doors meet or exceed enforced standards and certifications

  1. The CL0806 unit has a lockable 1-1/2 hour fire rated double leaf steel door.  The door is located on the front of the storage locker and is aproximately 60″ tall.
  2. Integrated with a spill containment system, this locker has been raised off the ground which makes the door and floor of the unit not flush with the ground. Included with the locker is a heavy duty access ramp for easy access during the contract period.
  3. The roof of the CL0806 storage locker consists of continuously welded 12 gauge steel plates that are permanently attached to the storage locker.  The roof is noncombustible and weatherproof, and is sloped to facilitate rain run off and equipped with a rain shield over the doors of the unit.  Exterior roof sheets are continuously welded to roof supports at each seam for maximum strength.

Fire Suppression System

Dry Chemical Fire Suppression
Dry Chemical Fire Suppression Pre-engineered Fire Suppression System.
Dry chemical fire suppression designed for class A, B, and C fires. Equipped with fusible link detection for Remote Annunciation and a manual pull station. System is UL, ULC listed and FM approved. See How It Works

Adequate and accessible fire suppression systems

  1. This paint storage chemical storage building is equipped with state of the art fire suppression system. It has a ready-to-use 21 lb. dry chemical fire suppression tank that is UL, ULC listed and FM approved for the A, B, and C fire classes. This high quality system is also equipped with  remote activation with an integrated  fusible link detection, a manual exterior pull station , and multiple interior spray nozzles for complete coverage in a flooding activation. The dry chemical tank is mounted on the exterior of the locker, and comes with an audible alarm for added safety. The system is unarmed per D.O.T regulations and must be armed and certified by a licensed representative.

Secondary Spill Containment

Secondary Hazardous Chemical Spill Containment System

  1. This locker is integrated with a high quality secondary containment system to prevent the leakage of solid or liquid chemicals. Our containment system meets or exceeds the EPA’s spill containment capacity requirements. The heavy duty  open grate flooring system allows for chemicals to fall through the grate as to not contaminate other materials in the locker, and the locker itself. The leak proof design is assembled with  a deep welded steel floor grating, a large secondary containment sump, and a high density leak-proof sump liner. For added protection, the galvanized steel grating runs from wall to wall in the building, the sump is manufactured with solid plate sheets with continuous welds, and the secondary containment sump has been lined with a chemical resistant coating. This locker’s flooring has been designed and manufactured to meet with the specifications of the National Association of Architectural Metal Manufacturers (NAAMM).

Electrical Specifications and Load Center

HAZMATCL0806  Electrical Components

  1. Our electrical components are UL listed single phase, 3 wire, and has a 120/240V 100 electrical load center. The load center is mounted on the exterior of the locker encased with a rainproof, sleet-resistant, and ice-resistant outdoor grade enclosure. It has been designed to meet with all of the requirements of the Underwriters’ Laboratories.
  2. All of the installation of our electrical components in the chemical storage lockers are done within the regulations of the National Electrical Manufactured Association (NEMA), National Electrical Code (NEC), and he National Fire Protection Association. This locker is well equipped with all of the electrical and motor components necessary for operation once a power source has been supplied.

Lighting Components

Explosion Proof Electrical Lighting

  1. Our explosion proof electrical lighting is designed to work in conjunction with flammable materials. The lighting component is UL listed class 1, Div 1 & 2, and groups C and D. It is also listed as Class 2, Div 1 & 2, Groups E, F, G, and Class 3 Div 1 & 2. The lighting is specifically designed to be used around moisture, dirt, dust, corrosion, and vibrations. The explosion proof lighting can be activated  from an exterior switch prior to entrance in the building.

Mechanized Explosion Proof Electrical Ventilation System

Chemical Storage Approved Explosion Proof Ventilation

  1. This locker features a high quality ventilation system required for proper paint storage facilities. This system is designed to ventilate flammable storage areas with proper air turnover. It has a continuous minimum replacement of one cubic foot every minute. Our ventilation system is well equipped with a 3 hour fire dampers, UL listed 165 degree fusible link activation system, and a gravity flow ventilation system.
  2. The mechanical ventilation system moves about 6 full air changes every hour. This exhaust air is released above the locker as to not accidentally recirculate bad air. This explosion proof electromechanical ventilation system uses a UL Listed, Class I, Division 1, Group C and D compliant enclosed motor with non-static 12 inch diameter cast aluminum fan blade. This mechanism is externally mounted which can be manually operated with the exterior UL fan switch prior to entering the locker.

Climate Control And Air Handling

Storage Locker Heating and Air Conditioned Climate Controls

To ensure your facility meets storage requirements for most paints, thinners, and other material requiring a select temperature range. Our paint storage buildings are engineered with Explosion Proof Climate Control to ensure a steady and compliant storage environment of your hazardous materials.

  1. The HAZMATCL0806 locker interior is well-lined with heavy duty Galvalume steel sheeting. Mineral fiber insulation is installed in each building within the ceiling and walls which allows for the building to maintain an R value of R-11. The climate control system is explosion proof with an air conditioner and a heater that can maintain a specific temperature.
  2. Explosion Proof Wall Mounted Air Conditioner
    1. Explosion Proof air conditioner is UL Listed, and Class I, Division 2, Group A, B, C & D complaint. There is an interior temperature controller with user-adjustable temperature settings allowing operator to properly store flammable liquids, combustibles. It has a totally enclosed fan motor with stainless steel shaft to resist corrosion and a hermetically sealed overload and an exterior switch to prevent arcing.
  3. Explosion Proof Wall Mounted Heater
    1. The Forced Air Heater is engineer explosion proof, and is UL Listed, Class 1, Division 1 & 2, Groups C & D; Zones 1 & 2, Groups IIA & IIB compliant. It also includes a user-adjustable thermostat for temperature control.

*Images are for referencing purposes only. Make sure to contact us for complete specifications for our available inventory. Please consult your local authority having jurisdiction to ensure your storage needs are met.

Compare non-fire-rated models

ModelFire ratingSizeCapacitySpill sumpExterior (L x W x H)
CL0806Non-Fire-Rated8' x 6'Up to 6 drums133 gal7'0" x 5'0" x 8'5"
12-DrumNon-Fire-Rated—Up to 12 drums——
CB2008Non-Fire-Rated20' x 8'Up to 25 drums460 gal20'0" x 8'0" x 8'6"
CBC2008Non-Fire-Rated20' x 8'Up to 25 drums460 gal20'0" x 8'0" x 8'6"
CBMP2008Non-Fire-Rated20' x 8'Up to 25 drums460 gal20'0" x 8'0" x 8'6"
27-DrumNon-Fire-Rated—Up to 27 drums——
42-DrumNon-Fire-Rated—Up to 42 drums——
57-DrumNon-Fire-Rated—Up to 57 drums——
CL0808Non-Fire-Rated8' x 8'Contact us——

Other ratings: 2-hour fire-rated · 4-hour fire-rated

Frequently asked questions

Which options can I add to a chemical storage building?

Climate control, heating, air conditioning, freezer / refrigeration, lighting, shelving, spill-sump shelving, racking, and wet or dry fire suppression are available. Ventilation and secondary spill containment are standard.

Do you rent drums, totes or the chemicals?

No — we rent the storage building, locker or container. You supply the drums, totes, pails and other packaging.

Can I store IBC totes and pallets?

Yes. Tote and pallet buildings hold 1 to 36 totes or pallets across our fleet; the SL2008-4034 in this catalog holds 4 IBC totes with a pump and work area.

Which fire rating do I need?

It depends on what you store and how close the building sits to other structures and property lines. Your fire marshal or AHJ makes the call; send us your materials list and site layout and we will recommend a model.

Talk to a specialist

Get a quote for the CL0806

Tell us what you need and where it is going. We reply within one business day with availability, lead time and a rental quote. In-stock units ship in days with rush processing; turnkey delivery and pickup are quoted per site.

Call 888-264-2449

Free Consultation

Tell Us What You Need

On submit you agree to all Terms and Privacy Policy.

Or call 888-264-2449 · Mon–Fri 8AM–5PM